Max Flow systems
- Thread starter DarWood
- Start date
check out the smartparts website.
It'll have bottles on there.
if its a standard thread (as opposed to a reversed thread) then any air bottle will fit it i think.
If you want to find other priced on standard thread bottles, try AirGunDesigns, Smart Parts, Planet Eclipse (im sure they sell them). Whoever you speak to tell them wat you want to put it on, and they will surely be able to help.
It'll have bottles on there.
if its a standard thread (as opposed to a reversed thread) then any air bottle will fit it i think.
If you want to find other priced on standard thread bottles, try AirGunDesigns, Smart Parts, Planet Eclipse (im sure they sell them). Whoever you speak to tell them wat you want to put it on, and they will surely be able to help.
my cousin just got a coshocker wth max flow, and his bottle dont fit my gun nor does my bottle fit his, he has to turn his bottle to the left where as i have to turn mine to the right
What you are saying is that the two valves are different,one is left hand thread & the other is right hand thread,left is for air,the thread in the cylinder will still be the same,just swap the valve on/ off over if you want to swap cylinders,it stops people fitting high pressure air into co2 setups.Hope this helps.
You guys are talking about screwing the bottle onto the Regulator aren't you? Not screwing the reg(+bottle) into the bottom line?
cos for bottom line ASAs the thread is always the same isnt it?
(screw the bottle in clockwise looking from the back of the gun)
FUBAR
cos for bottom line ASAs the thread is always the same isnt it?
(screw the bottle in clockwise looking from the back of the gun)
FUBAR
The reg stays fixed to the gun grip & the cylinder has a on/off tapp fitted to it if, it is a 3000psi version which stays fitted to the cylinder.The 4500psi version of which i have the reg still stays on the gun & the cylinder screws onto the reg, no on/off tapp fitted to cylinder as it has one built in on the reg.if you screw your cylinder onto the reg in a different direction than you freinds THEN its the cylinder valve ( on/off ) that is different & not the cylinders thread.