The problem is that it keeps freezing when I have fired a few shots.It is run on CO2, so is it just drawing liquid or is there something wrong with the Max Flow?
Thanks
Thanks
Max Flow problem
- Thread starter smalltimeganster
- Start date
You're shooting co2. Plain and simple. Don't do it. No gun worthy of having a Maxflow on it deserves to have co2 run in it. Running co2 through your gun is like feeding your child 3 years out of date chili. Yeah, they can live on it, but why would you ever do that to them? Just don't do it. If any woman that knows what she's looking at sees you, what do you think she's going to think of you and how you would treat her?
max flow with co2
oh that really helped him out dint it!!! NOT
ive been setting up impulses for loads of people this season on both air an co2 and found very little difference between them apart form consistancey over the chrono.
i've been shooting an impluse for the last 18 months and never had any bother at all with co2
dude heres a few suggestions
check and make sure your co2 bottle has an anti syphon fitted and its been set correctly!
try losening of th lock nut on the reg and with the gas disconected unscrew the end cap of the maxflow all the way of and wipe the pin with a drop of air lube(take major care and attention if you do this to get all the parts back in the right places when you put it back together)
if you dont have a copy of the max flow manual you can down load one from smartparts web site or send me an email and i'll send you a copy
oh that really helped him out dint it!!! NOT
ive been setting up impulses for loads of people this season on both air an co2 and found very little difference between them apart form consistancey over the chrono.
i've been shooting an impluse for the last 18 months and never had any bother at all with co2
dude heres a few suggestions
check and make sure your co2 bottle has an anti syphon fitted and its been set correctly!
try losening of th lock nut on the reg and with the gas disconected unscrew the end cap of the maxflow all the way of and wipe the pin with a drop of air lube(take major care and attention if you do this to get all the parts back in the right places when you put it back together)
if you dont have a copy of the max flow manual you can down load one from smartparts web site or send me an email and i'll send you a copy