Matrix Virtue Board?!

[impamiizgraa]

Ok...i've jst put the virtue board into my matrix...all gd, as far as i no...

...only trouble is, i turn it on...with no air, hopper or anything, and the LED is green...saying there's sumin in the breech...???

i pull the trigger once and it flashes green...suggesting there's an eye malfunction...

any ideas as to how to solve this lil problem? or is it jst me being a pleb???

cheers

 

[mdking]

have u cleaned the eye's on the matrix lately?

matt

 

[Dskize]

is the bolt stuck?

 

[IL=Tim the Yank]

Make sure the plastic clips on the eye wires are firmly into the board too.

 

[Skeet]

Yeah...looks liek its not seeing teh eyes....push the plug home GENTLY, with a small screwdriver or similar, each edge a bit at a time..

 

[impamiizgraa]

Originally posted by mdking
have u cleaned the eye's on the matrix lately?

matt

eyes were working perfectly before i changed the board.

i've made sure the eye wires are in the board properly...but i will go have another check wen i get home jst in case...

hmmmm....

cheers guys

 

[PaintballBudgie]

Check the manual for the chip.

You may find that it uses different colours for things.

ie shows green where stock was blue.

 

[impamiizgraa]

Originally posted by PaintballBudgie
Check the manual for the chip.

You may find that it uses different colours for things.

ie shows green where stock was blue.

3

i've checked the manual...so i think it's all working as it should...i've heard the proto's wiring is fairly fragile, so mayb i've disconnected something somewhere along the line...

i'm gonna take another look today if i get any time...otherwise i'll get it checked out 2moro....

 

[Skeet]

When you switch on a Virtue, if there is a ball in teh breech, Blue light is on, if there is nothing in teh breech, blue light flashes, turn teh eyes off, and a red light comes on.
I think...

 

[impamiizgraa]

Originally posted by Skeet
When you switch on a Virtue, if there is a ball in teh breech, Blue light is on, if there is nothing in teh breech, blue light flashes, turn teh eyes off, and a red light comes on.
I think...

well with mine the colours are green, red and "yellow" (which is so close to red...u can't tell the difference, lol)

Green - Ball in Breech
Red - No ball
Flashing Green- Eye Malfunction
Flashing Red - Eyes turned off

So wen i turn the gun on, it should be red...but it's green, which aint making much sense, so...think i mite get it check out...

mite try putting the old board in and seeing if tht works...to determine whether it's the gun or the board...