Alrighty then, it's been a while since I last played, and that was the first time I had played in ages too, so now I have decided to part ways with 2 of the 3 guns which are sitting around collecting dust
First up is a matrix with a bit of history attached to it (supposedly). It's an LCD matrix serial # 01791 in a black/purple acid wash anno with some extra milling on the sides and top. It's supposed to have belonged to Richmond Italia himself (for those of you who can remember who Richmond is) but whether or not that is true I dunno, but nice to think that it may be true. It comes with:
NYX board and eye's (external wire) with tadao musashi 3 chip installed (semi, capped semi and ramp).
Both high and low pressure AKA regs.
No rise ccm feedneck in black.
Silver angel detents.
Black unimount asa.
Match anno'd barrel.
Cobalt standard double trigger.
The bolt is a red aftermarket bolt, think it's the aardvark one if I remember correctly what Dave said it was when I bought it, but couldn't say for sure, but I have an o-ring pic guide that says it's a Slam bolt so who knows
All this also comes with the original chip, original match anno'd feedneck, LPR, back bolt assembly thingy and blade trigger as spares, but that's all I got when I bought it so is all I have now. I last used this at a rec day in august and it absolutely ripped! Got me in trouble with my paint bill it was so fast, as as with all matrices it's accurate too.
Price £100 but open to sensible offers
Secondly I have my Racegun Turtle cocker. This has been a non-stop project for me, but it has finally come to a point where it is complete, just needs the reg setting up. I wish I could keep it but lack of playing and needing money means it's got to go. I set the timing up for it when I got the turtle body, but didn't get round to adjusting the reg.
It's a silver/chrome vert feed turtle conversion mini body with black delrin bolt and top block and the turtle hammer and turtle valve inside. I have a standard velocity adjuster with spring in there atm, but also have a heavy Madman spring and IVG velocity adjuster which was in the body when it was sent to me. It also comes with:
Silver WGP clamping feedneck.
Evo LPR.
Magnum 44 ram with QEV's.
Silver Raceframe with large style SMC valve and break beam eye's (rare as rocking horse sh#t atm) with black ANS covers (latest firmware installed).
Black front block and vert asa.
Chrome ccm on/off asa (needs a plug in unused hole)
Silver Raguba bent blade roller bearing trigger.
Black WGP inline reg (has a few scratches for trying to disassemble it for cleaning).
I also have some spares inc. standard double trig, standard blade trig, silver Raguba trigger guard (gives more space for fingers), and the wall charger and data cable. I also have a palm pilot m100 with all the cables for connecting to the frame at the field. I will also create a disc with all the software and manuals you will need to get you going.
Price £150 but open to sensible offers.
Lastly but not leastly I have my silver to black fade AIM cocker body kit which includes body, front block and bolt, 15 degree asa, angel threaded clamping feed neck and back block. It has some minor scratches and some anno has been worn off by an old pump arm, but a pump arm will cover it when assembled. I paid £200 for this new, but have no idea hoe much to sell it for, I would like to think I could get £75-£100 for it but any sensible offers welcome.
TO TRADES! I need the cash! All prices inc. p&p to the UK but I will ship abroad. If you want it shipped abroad then I will split the shipping cost with you. I accept Paypal (add 4%), bank transfer and cheque (won't post till cheque clears).
I will try to get pics sorted out tomorrow in the daylight.
Post here, or PM me if your interested in anything.
Cheers,
Charlie.
First up is a matrix with a bit of history attached to it (supposedly). It's an LCD matrix serial # 01791 in a black/purple acid wash anno with some extra milling on the sides and top. It's supposed to have belonged to Richmond Italia himself (for those of you who can remember who Richmond is) but whether or not that is true I dunno, but nice to think that it may be true. It comes with:
NYX board and eye's (external wire) with tadao musashi 3 chip installed (semi, capped semi and ramp).
Both high and low pressure AKA regs.
No rise ccm feedneck in black.
Silver angel detents.
Black unimount asa.
Match anno'd barrel.
Cobalt standard double trigger.
The bolt is a red aftermarket bolt, think it's the aardvark one if I remember correctly what Dave said it was when I bought it, but couldn't say for sure, but I have an o-ring pic guide that says it's a Slam bolt so who knows
All this also comes with the original chip, original match anno'd feedneck, LPR, back bolt assembly thingy and blade trigger as spares, but that's all I got when I bought it so is all I have now. I last used this at a rec day in august and it absolutely ripped! Got me in trouble with my paint bill it was so fast, as as with all matrices it's accurate too.
Price £100 but open to sensible offers
Secondly I have my Racegun Turtle cocker. This has been a non-stop project for me, but it has finally come to a point where it is complete, just needs the reg setting up. I wish I could keep it but lack of playing and needing money means it's got to go. I set the timing up for it when I got the turtle body, but didn't get round to adjusting the reg.
It's a silver/chrome vert feed turtle conversion mini body with black delrin bolt and top block and the turtle hammer and turtle valve inside. I have a standard velocity adjuster with spring in there atm, but also have a heavy Madman spring and IVG velocity adjuster which was in the body when it was sent to me. It also comes with:
Silver WGP clamping feedneck.
Evo LPR.
Magnum 44 ram with QEV's.
Silver Raceframe with large style SMC valve and break beam eye's (rare as rocking horse sh#t atm) with black ANS covers (latest firmware installed).
Black front block and vert asa.
Chrome ccm on/off asa (needs a plug in unused hole)
Silver Raguba bent blade roller bearing trigger.
Black WGP inline reg (has a few scratches for trying to disassemble it for cleaning).
I also have some spares inc. standard double trig, standard blade trig, silver Raguba trigger guard (gives more space for fingers), and the wall charger and data cable. I also have a palm pilot m100 with all the cables for connecting to the frame at the field. I will also create a disc with all the software and manuals you will need to get you going.
Price £150 but open to sensible offers.
Lastly but not leastly I have my silver to black fade AIM cocker body kit which includes body, front block and bolt, 15 degree asa, angel threaded clamping feed neck and back block. It has some minor scratches and some anno has been worn off by an old pump arm, but a pump arm will cover it when assembled. I paid £200 for this new, but have no idea hoe much to sell it for, I would like to think I could get £75-£100 for it but any sensible offers welcome.
TO TRADES! I need the cash! All prices inc. p&p to the UK but I will ship abroad. If you want it shipped abroad then I will split the shipping cost with you. I accept Paypal (add 4%), bank transfer and cheque (won't post till cheque clears).
I will try to get pics sorted out tomorrow in the daylight.
Post here, or PM me if your interested in anything.
Cheers,
Charlie.
