Matrix LCD - Few questions?

[Beaker]

Well,

I've managed to "acquire" an LCD 'trix for review and I'm after a bit of info.

I've never used one before so I have taken it all apart and worked out quite where all the gas goes, how the solenoid and bolt work etc and read a fair bit about it.

Unfortunately, the marker is missing the manual, not a very good start at all , one thing I want to know is what's the best way to gas it's up?

Which reg to start with? how do you set the Trinity? how do you lock the Centerflag clone reg?

Also - how do you work out the max ROF? Should I need to mess with the forward/backward pulse or are the defaults actually OK?

Any problems/issues I should look out for?

Buddha know's my first impressions and I just need to shoot it now to see if I'm right

Thanks in advance

 

[Sean]

Beak,

best place to go for this is the matix centre website!

they have a forum on there where they have answered all these questions a number of times (specially the forward backward pulse)

hope it helps

 

[Buddha 3]

Beak,

You can't lock the centerflag reg. When gassed, it should be so tight that the only way you can turn it is with an allen key. Tres strange...
The trinity is simple to set. Screw it almost all the way out, gas up the Matrix, and start turning it in, meanwhile pulling the trigger, until the marker cycles. When it cycles, give it another three quarters to a full turn in, and lock it. Voila, ready to rock...
I don't know how to work the settings on the lcd though, haven't worked with that one yet.

Looking forward to the review mate!

 

[SHERIFF]

foward back rof
10 35 22.2
12 35 21.3
14 35 21.3
16 35 19.6
18 35 18.9
20 35 18.2
24 35 16.9
35 35 14.3
10 45 18.2
12 45 17.5
14 45 17.5
16 45 16.4
18 45 15.9
20 45 15.4
24 45 14.5
35 45 11.3
go to the forward pulse on the menu open the rubber grip and you will see a small white button press this and you will see the lock an the display open you can now change the settings for fire rate do it again for backwords pulce.
the rof that is on the display as yo fire is only what you have reached not what it is set at.
As for the trinity reg screw it in all the way then set the feet pe sec as normal , when this is done unscrew the trinity untill the marker no longer fires .
Dile it back in untill it dose and give it the tree quarters of a turn this stops the trinity adjusting the fps and only changes the bolt presure like the mag.

 

[Beaker]

Thanks for your help guys.

With the pulses - it's set at 12/35 which I presume is default. Is it likely I will need to change that or should I just leave it? I'll pop over to Matrix Center too.

And Buddha - I've found something else to add to my "list" on the gun

Should be interesting

 

[Baca Loco]

Cool deal, Beak

Who do ya gotta blackmail to get the sweet guns?

 

[Beaker]

Cool deal, Beak

Originally posted by Baca Loco
Who do ya gotta blackmail to get the sweet guns?

Hmm, we'll see about that

As for blackmail, it's all about Mr Big and an entire tube of deep heat - he keeps saying "It wasn't me" but Joe walks funny so you do the maths.

 

[ascutt]

BEaks

Or you could just give me a call mate.