Matrix/armageddon Problem

[Davo]

OK, just changed markers again !

Got hold of a LCD Matrix and strapped my Geddon on the bottom, expecting to rock and roll as the geddon was already set at 500psi output pressure (I think) as recommedned in the matrix manual.

Anyway, when the air go's into the vert reg it does not seem to be getting to the marker and just vents out of the vert reg, so the gun will not fire at all

any obvious ideas?????

I have ran out of air now so I cant really check it again but does anyone want to hazard a guess as to whats wrong ???

Its not the hoses or elbows, I have just changed them for new ones

answers on a postcard ........................

thanks

 

[Philip]

Is the HPR set right, sounds like it may be wound all the way out.

 

[Davo]

HPR?

Dont want to seem like a total tit but which bit is the HPR ??

Is it the bit under the barrel at the front ?

If so does this need to be wound in ?

 

[booga]

No the bit under the barrel is the LPR (trinity).
Is it only venting out of the reg?
If so is it out of the top or bottom?

 

[Eddepet]

Sound to me like someone put the inline back together wrong......

 

[SDRamones]

Sounds like the Inline reg was set too high. That happens when the pressure it set to high. Back out the Inline, add air, then slowly increase pressure to around 200psi. CW for the stock reg.