Making my gun compatible with MS rules for Madrid

[Claudio]

I have read the new rules book for the Millennium (v 5.02 as published in their web site)

Im playing with a Tadao board on my Timi and I would like to benefit of this 'ramping allowed for some' rules. The problem is that my gun ramp @ 3 bps as per the original setting. Does anyone know if any Tadao tech will be in Madrid to flash the cards, or maybe the original Alias cards can be flashed by NPS in order to meet this new 8 bps requirement?
Thank you

11. Markers
11.01 Players may use a single .68 caliber paintball marker, which consists of a single barrel and a single trigger system. Double-action triggers are prohibited. Markers will be limited to 15 balls per second, defined as no two consecutive shots timed shorter than 65ms apart. Trigger activation may be stored for up to 100ms after trigger pull but must be cancelled on the next trigger activation (this is to allow guns to shoot at 15bps in semi-automatic mode). Ramping of shots will be allowed only once 8bps has been achieved and then the marker may ramp to 15bps only if the 8bps is continually maintained. Once the trigger is released only a single additional shot may be discharged thereafter.

 

[bruce]

NPS where flashing the timmy boards at Campaign, i would expect they should be in Madrid.

may be worth contacting them before hand


bruce

 

[Christian-Malera]

The original Timmi board can not be upgraded to accomedate the Mill rules at this time. ( I am not 100% but 99.9% sure)

We played with pure semi in Birmingham.

 

[Claudio]

thank you for the infos.

Originally posted by Christian-Malera
We played with pure semi in Birmingham.

no 15 bps cap?

 

[Christian-Malera]

pure semi with cap

 

[Freddie Brockdorff]

Respect!!!

 

[Stark_Cyc]

Yep NPS cant flash first gen Frenzy boards so check what version you have or go with 15bps semi on your Tadao.

 

[Mac]

Just to say i had my frenzy board flashed at campaign but that just gave it psp mode not ms mode.