mag on air

[Brown]

what has to be done to a mag if you want to convert from co2 to air?

LOSING...When it comes i wont even notice...I`ll be too busy looking good

 

[Mark]

Change all the seals as it been used on CO2 except the main body seal this is due to temperature fluctuations when using CO2 ...air runs a lot hotter. Other than that nothing left to do, new springs on the bolt and the grenade pin would be a good thing to do anyhow unless you have only just done that.

 

[Brown]

Thanks mark

havent done anything yet just at the shall i sharnt i stage cash has a lot to do with it , will be a few months away yet just doin some research

LOSING...When it comes I wont even notice...I`ll be too busy looking good

 

[crom-dubh]

A spares kit will set you back about £15 mate and is well worth doing. And as Mark says thats all you really need to do. What air system are you thinking of putting on there? You dont really need an adjustable reg as the mag has a secondary reg built into it.
Unless you have a retro valve that is. Then an adjustable would be an advantage as you can then adjust the reactiveness of the trigger. If you dont have a retro valve then go for a PMI pure energy or something like that.

 

[Fleisher]

I keep a bog std. Mag as a spare marker and just screw a Melee bottle into the bottom line ,works fine ,no mods but if your using it for tourneys a few new seals and springs won`t break the bank.