hi guys put a cocker threaded barrel back (un1tec) onto my promaster but its well and jammed on and won't budge . how can i get it off without damage ?
James
James
lucky barrel back wont come off promaster.
- Thread starter trakkerboy
- Start date
you turning it the right way?
if not get a friend to hold the marker and you use both hands to turn it.
other wise a vice and strap wench will be needed.
if not get a friend to hold the marker and you use both hands to turn it.
other wise a vice and strap wench will be needed.
Or as in the post about seperating the UL barrel in this section warm the gun around the barrell with a hairdryer.
Laters
Laters
Do what I did earlier....
Use a hairdryer on the threads....get it nice and hot...wait a few minutes and BOOOOM......off it pops.
Worked for me and mine was on solid. (i used clamps 'n' all sorts beforehand.
Try it, you may be suprised
-ChEf
Use a hairdryer on the threads....get it nice and hot...wait a few minutes and BOOOOM......off it pops
.Worked for me and mine was on solid. (i used clamps 'n' all sorts beforehand.
Try it, you may be suprised
-ChEf
words of wisdom... it worked lol , few nasty gashes on it thoughDo what I did earlier....
Use a hairdryer on the threads....get it nice and hot...wait a few minutes and BOOOOM......off it pops
Worked for me and mine was on solid. (i used clamps 'n' all sorts beforehand.
Try it, you may be suprised
-ChEf
words of wisdom... it worked lol , few nasty gashes on it though
how come you gashed itAll you had to do was warm it up, wait a while and unscrew it
-ChEf
on the barrel or the threads?words of wisdom... it worked lol , few nasty gashes on it though