LPR on ir3 fly

[ouch_it_hurts]

Does anyone know what the lpr should be on a ir3 fly or what it can be dropped to. My fly breaks fragile paint (AMP), its fitted with a a4 soft nose bolt would like to know how to cure this problem.

Cheers

 

[Tom Allen]

What is the lpr set at now, factory set it's around 95psi. You can come down a bit on this, but you may find the lpr pressure has creeped up because of dirt in the reg.

 

[dr.strangelove]

I used to run my IR3 and LCD shimless at about 80 psi no prob. Everyone's told me that's impossible, or that I was an idiot for doing so, but they both worked great that way. So if you want to lower it, do so, just check and make sure you're not getting shootdown and cocking problems. Worst comes to worst, you put some shims back in.