Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

LP or HP Max Flow on a cocker...

Munkeh

Planet of the Apes
Jul 12, 2002
539
0
0
Cheshire
Visit site
Ok, so I have a HP max flow currently on my cocker but want to run a gas through grip instead of an inline. Using the MP spring (down to 300psi says SP) would I be able to run the cocker effectively? I don't really want to use a LP one as SP quote the highest ouput for it at 240. Any help appreciated...
 

Skeet

Platinum Member
There is your answer then...you need ideally the Black Magic on there, if you use just the maxy, you will be running 325 psi into the gun...when you rapid fire, you will drop off as the recharge rate wont be fast enough, so, dont put a gas thru grip on it, use an HP maxy and Keep the black Magic. You need to run about 550 to 600psi into the Vert reg, or the marker simply won't work very well under rapid fire..although I have heard that people use MaxFlows, but Im not convinced of the recharge rate..if it worked better/well then Planet/Nexus would do it (after all, why double reg if you dont need to), but they dont.
 

Munkeh

Planet of the Apes
Jul 12, 2002
539
0
0
Cheshire
Visit site
But skeet... have a look on the belsales site. Loads of the Evo-Xs have gas throughs... I don't think I really need to double reg a max flow tbh.

I will e-mail DB and ask him on the matter, then if all else fails I shall try it out... The worst that can happen is poor efficiency!