little problem with a Shocker

[RealRT]

hey guys, when i shoot my '03 shocker the 1st ball comes out perfect, and the wen i shoot the 2nd ball straight after it falls to the ground within 10-20 metres do i just need 2 bump up the velocity or pressure???

thanks

 

[Revolt]

up the dwell a bit, make sure your tank is screwed all the way in, change batteries, up your reg pressure

i dont actually own a shocker but that would be the first things i would do :>

 

[RealRT]

thanks dude

 

[lemonadeX]

What about the 3rd ball? Does it fire 1 ball OK and the rest poorly? If so it could be something to do with one of the regulators - Not recharging with enough air pressure after the 1st shot. Do as Revolt says firstly, and if they don't solve it take apart and lube the regulators.

I also know little about Shockers, but it does sound like a reg issue.

-Will

 

[RealRT]

yea its only the 1st ball which is any good, i just look'd at the gauge after i shot, stated at 200, then when i fifed it went down 2 about 160-170 for about a second, dont know if that relly affects it

just got it so i have little knwledge on my own gun lol

 

[no-infernomark]

what board you using? as your first shot dwell might be high enough, and the dwell there after might be low(not sure if thats plausible problem) clean ya reg, make sure you have enough air and change battery first always most problems solved with that

 

[RealRT]

its a stock board, (03 shocker)

thanks for your help guys, ill clean my reg, change the batterys, up the velocity a bit, if it dont work ill come back here

thanks

 

[john251282]

I would suggest clean and lube the reg and maybe up the dwell on the board, do you know what it is running at the moment?

There should be no need to increase velocity if the first ball comes out ok.