leaking 'qev'

[custard-spbp]

hello guys
can any one tell me how to seal a leak on the qev ?

 

[jahlad]

depends on the type of qev and where its leaking from, if the threaded part is snapped you will need a new one

 

[custard-spbp]

its on the thread and its not snapped

 

[jahlad]

chances are it hasnt been loctited propperly or the loctite has not sealed.....id remove it then using a TINY amount of green loctite scraped into the thread with a pin (or other such sharp implement) reattach it.