Leaking PM6

[Andygoth]

Looking for help with a PM6 thats got a gas leak.
leak is coming from between the frame and the collar that the HP reg screws into.

(arrow marks the spot)

http://i202.photobucket.com/albums/aa129/AndyGoth/DSCF0310-1.jpg

Anyone know what could be causing it and how to fix it?

Thanks

Andy

 

[RainbowShooter]

Checked the oring on the hyper 2?

 

[rayko]

If you are happy that its not leaking out of the where the hyper2 screws into the body then:

If it comes from the small hole under the LPR, you need to remove your LPR. The cause of the leak is one of the three orings on the outside of the LPR or the o-ring found inside the LPR.

However before trying that, I would change your sail oring and the two outer fuse bolt orings on the can, and the outer oring on the top hat.

If you dont get anywhere, and you feel your PM could do with a good servicing, drop Neil@Heaven a line.

 

[Andygoth]

I have no idea what the hyper 2 is.

I put a bottle on it and could hear it leaking, it did fire though. I took out the LPR and checked that over, took the back off and checked the bolt and made sure the HPR was screwed in tight.

When i put it all back together it was still leaking, although maybe a little less. I put some drops of soapy water on the places i thought it could be leaking from but it's coming from between the body and the collar that the Hpr screws into.

The online manual doesn't mention if that comes off or has a seal. when the hpr unscrews should the angled top piece unscrew as well or is that supposed to stay on the gun?

 

[Andygoth]

Found problem, top of hpr was lodged into the body. someone has used pliars to grip the top of the hpr at some point and mangled the threads and O ring.

 

[Niall W]

hyper 2 is the type of hpr on the pm6