Leaking PM5 (O-Rings?)

[lemonadeX]

Hi guys,

Received in the post this morning ego's PM5 which is known to not work due to leaking. When airing up, the bolt doesn't seem to cock (stays in the forward position) and leaks out the big hole at the front of the bolt. I've checked over the O-Rings, none which seem out of the ordinary, and have all been lubed up.

When I turn the marker on and deactivate the eyes, the 'noid clicks when pulling the trigger so I *think* I've got it narrowed down to the bolt...Any ideas?

Had a look on the web but is there anywhere that does a full O-Ring kit for the Fuse bolt system that the PM5 uses? Can't hurt to replace them all

Cheers,

-Will

 

[Game]

http://forums.matrixowner.com/showthread.php?t=8939

you will have to register but should sort you out

I have an air Leak through the back hole of the bolt
Take out the bolt, unscrew the back part of the bolt and change the #009 BN70 [3,4] o-ring on the back of the bolt shaft.

Member suggestions
Check for scratches in bolt cap.
Use a #010 BN70 [3,4] o-ring instead of a #009.

be generous with the lube as well dont go mad but more than just a shiney o-ring

 

[lemonadeX]

Thanks for the link Game, very helpful I've signed up and posted my problem - Sounds like one of the front O-Rings but I'll double-check with the guys on there.

-Will

 

[J@mes]

on a leaking note (if you consider this jacking, just tell me lemondeX and i'll delete this post), where is the best place to source O-rings, my DM4 is leaking out the back of the bolt (on the stock bolt) and out the front of the bolt (on my evolve bolt)

thanks

-james

 

[lemonadeX]

Waa!! Another WGP4Life!!

Jokin' mate I could do with a new O-Ring kit too so post up if anyone has the link to one.

-Will

 

[lemonadeX]

lol, only need 1 of each Thanks for the link though, Longbeard.

-Will

 

[J@mes]

if my DM4 is still as bad on sunday, im going to buy one, but i think replacing my battery has somewhat solved the problem.... LOL im such a noob, i took the whole thing apart to see why it wasnt firing, then my mother asked me if i had replaced the battery .... my god, the air was blue..

-james

 

[Fly]

If you guys PM me what you want I'm sure I can sort something out

 

[Hoodless ECI]

28 dollars all in including postage;

http://cgi.ebay.com/Dye-DM4-DM5-DMC-Proto-Oring-Kit-O-Rings-Slick-Honey_W0QQitemZ330029400100QQihZ014QQcategoryZ310QQtcZphotoQQcmdZViewItem

Not used him myself so can't vouch for him, but your only risking 14 odd quid

I use this guy for all my o-ring need's and he's the best around.
FAST delivery ( even from the states )
Only charges you one delivery if you buy more than one item
Very good prices
HIGH quality o-rings

I just restocked with two DM6 kit's from him

Highly reccomended

 

[ego]

Before I posted the gat out to you I replaced every bolt o-ring.