Leaking ASA - PMR.

[JTD1993]

Well today I went to play ball. I ended up using an inferno like everyone else because my ASA ended up leaking and no air was going through my marker.

Can I do anything to fix it?

It's where the macro line goes into... Which looks like a nut, I can feel the air coming out of there. Would duck tape stop it?

Oh and skeet if you got a spare on/off or something, mind bringing it tomorow please? Ta.

Thanks guys.

 

[jknight15]

is this with a 45000psi tank?

I doubt tape would hold the pressure of any tank tbh mate

 

[Lump]

cut the macroline off again mate sure its square end

 

[Big Mac]

you could try adjusting the pin. though that should come out of the exaust port in the top of the asa -


umm was the bottle screwed in all the way? silly question i know but cos its not an on/off it leaks a bit while you screw it in and thats where it starts getting harder to screw it in but keep twisting it should stop. sounds silly i know but it could be

 

[JTD1993]

you could try adjusting the pin. though that should come out of the exaust port in the top of the asa -


umm was the bottle screwed in all the way? silly question i know but cos its not an on/off it leaks a bit while you screw it in and thats where it starts getting harder to screw it in but keep twisting it should stop. sounds silly i know but it could be

Was all the way in, got a marshal to check and Phil Ham..

I'll have to see how it is tomorow Would I loose a lot of pressure by it or would I be OK to just try and play?

 

[spangley_special]

checked the oring on your bottle? makroline? ptfe the threads on the elbows?

 

[JTD1993]

It's the ASA, I blew into it. What's PTFE, Sorry don't know much . But not sure if it's the macro.

 

[Big Mac]

dont need to worry about ptfe tape

you dont have an elbow - yours is a fixed thing on the airport