Karni eyes

[SAXON]

Hi can anyone help I have two Karni,s one with a zero b board I can run it with eyes off and it rips as it should.But if I turn the eyes on it wont shoot.Not a major prob as I have run two bags of paint threw it 1000 balls with only one chop.But would like to have the eyes working regards Ken

 

[frosty]

have you checked the eye and reflective miror as i belive these are reflective eyes are clean for a start as this will reduce the rate of fire which is what im guessing its doing
if it is all clean you need to check you havent broken the eye lead

 

[frosty]

have you checked the eye and reflective miror as i belive these are reflective eyes are clean for a start as this will reduce the rate of fire which is what im guessing its doing
if it is all clean you need to check you havent broken the eye lead
also if it is reflective eyes like i belive it has issues with dark of reflctive shell paint as the eye thinks it is reflecting off the mirror but is actually off the side of the ball in the breach so it belives the breach is empty so will not fire to so if your using a dark shell try a lighter one
hope this helps
frosty

 

[Hawkins]

turn your zero b on and hold the red button inside toget into the menu, then your gonna want to see the sensitivity of the eyes, if this reading changes when you put a finger into the breach then the eyes are working fine and it might be a case of the paint is a difficult colourto read so making it breakbeam instead of reflective would help...