Just got me an Impy!

[JohnnyAce]

So a couple of questions for all you tech gurus out there:

1. I got the Impy second hand with CO2 reg. Now the only obvius prolem that I've discovered so far is that the black hose that connects the reg (attached to a drop forward not vertical) to the gat seems to come out of the top nut/connector. Is there a way of fixing that or should I just get a new hose?

2. Where is the best place to get advise/service an Impy in the Midlands?


Cheers,

Ace

 

[le-pig]

warped sports

 

[le-pig]

address

UNIT 7 CHANCEL IND ESTATE WOLVERHAMPTON

01902 455 455

ask for paul parkes,jim frenchman

 

[JohnnyAce]

Any more advise guys?

 

[spikeyken]

Welcome to the Impy family! Have a look at

http://www.pbnation.com

for just general impulse talk or

Impulse FAQ http://www.kamworld.net/paintball/ImpulseFAQ.html

ken

 

[H]

Personally I'd just avoid PBNation just on principle.

http://www.impulseownersgroup.com
SHould help you out with most technical and other Impulse queries. Although like PBN it is populated by annoying American children who think they know it all. Avoid the temptation the feed the trolls and only pay attention to the ones who don't routinely use words like '0w3d' and you'll be fine.

 

[pb-afroman]

The leak that you're having is probably coming from the fitting rather than the hose. There is an oring in the fitting that can get dirty from time to time, so either the oring or the fitting will probably need to be replaced.

 

[JohnnyAce]

Thanks for all the replys guys!

Got a Voodoo Delrin bolt in it and let it rip this weekend!

The thing worked sweet! Not a single chopped ball (up until I went balls to the wall and the wee Revvy couldnt keep up no more).

I am wondering whether I should get it Visioned or just get a Halo B, which is a cheaper option and the Warped Sports guys seemed convinced that it's the right one.

 

[F3Z]

Have u tried the obvouis smartparts.co.uk / .com / europe.com
for ur impy manual and and reg (if u have the maxy as most do) manual if you dont already have as u may not if its second hand.

 

[Tom Allen]

These hoses are meant to come out, but when gassed up they lock in. Try pushing the hose in and pulling it sharply it should lock. To remove the hose press the protuding collet in and pull the hose out, then release the collet.