Just a quick cocker question.

[Charlie]

Ok now I have never been totally clear on this. I have a mini cocker and I know that there is the chunk chopped off the front, but is there any difference in the bolts between standard and normal? I Would have thought no but I am sure I saw a site once ask if I needed a mini or normal cocker bolt.

Thanks for clearing this up for me.

Charlie.

 

[Gyroscope]

minis don't need a special bolt.

There are three types of bolt- pre-2k, 2k, and Evo length. Autocockers made before 2000 used a longer bolt than those made since, and Belsales (and a few others) used a shorter bolt still. There are some other styles, like half block and Osiris, that are really really short, but there is no confusing them with any others.

 

[dr.strangelove]

Mini 'cockers only use a different actuating rod, everything else should be the same (except of course for the ASA, since it screws into the bottom of the front block on a mini, and it's attached to the body, behind the block on a standard)