I have a quick question. I just bought a new lens for my JT Flex7 and I want to know how to remove my old one. Thanks
JT Flex7 Question??
- Thread starter pro_pain24
- Start date
Remove the ear pieces first together with the face shield and gently prise the old lens from the frame where the lugs of the lens comes through the frame...when you have done this and I am assuming you are not doing this on the day of using the goggles....put the frame into warm water to slightly soften the plastic and then start to put the new lens back into the frame starting with the lugs by the nose piece then replace all the bits you have removed and leave the googles in a warmish area to dry ,the foam will have gotten rather wet when you put them in the water (if they have the wetex foam fitted you still do it the same way but you remove the foam first). Oh and don't take the protective film off the new lens until they are totally refitted.
Oh, well sure Mark, if you want to take the wimp route..... uh, warm water you say?
That's an excellent idea, thanks Mark.
You know what I do Pro Pain? I pretend like I'm tryin' to get the freakin' things to go in, then, frustrated at my ineptitude, one of my teammates inevitably snatches them out of my hand and installs it for me. HA, they fall for it every time!
That's an excellent idea, thanks Mark.
You know what I do Pro Pain? I pretend like I'm tryin' to get the freakin' things to go in, then, frustrated at my ineptitude, one of my teammates inevitably snatches them out of my hand and installs it for me. HA, they fall for it every time!
When you're prising the the frame from around the old lens, start with the lug at top centre, then move around both sides, leave the 2 nose lugs till last. When putting in the new 1, start with the 2 nose lugs and work around from them.
Use only your hands. DON'T EVER USE ANYTHING ELSE!!!. (I saw someone using a screwdriver to force the frame over the lugs)
Use only your hands. DON'T EVER USE ANYTHING ELSE!!!. (I saw someone using a screwdriver to force the frame over the lugs)
I have Spectras , I assume they are they same. I use my JT barrel plug, it designed to help ease the lugs back in place.
i know this sounds really stupid but i got one of those jt barrel plugs and i cant for the life of me work out how it's supposed to help get the lens back on. any help appreciated dude
rich
rich