JT Excellerator 5.0 HElP pease

[Dazzer13]

Hi, I need to know the barrel length and gun caliber cheers
any help would be fine on the Jt cause i'm new,


If you know any sites that display this type of info or schematic/design could you tell me cheeersssssss.


Dazzer13

E-mail if you know of any thing

 

[Beaker]

Barrel is just basically a 12" and probably .690 as it's a JT barrel and that's the standard JT size.

but I don't know fo sho'

 

[Dazzer13]

Cheers

thank i wasn't sure cause i couldn't find any sites with spec so i didn't want to buy the wrong stuff cheeerss angain thanks



Dazzer13

 

[Little Jon]

actually the barrel is 9.5, inches long and email ledz at planet and hell tell you, or ring him, p.s. by a new barrel when u get it

 

[Beaker]

Ooops - must apologise,

I thought I read it was 12 in the FaceFull "review" but just checked and yeah, they say it's 10.

Sorry dude.

 

[Dazzer13]

Its allright

don't worry about i didn't even know, so its fine any cheers stealthknight and if i did buy a excellerator i should buy a new 14" holesless cause like you said it would stop the broken balls from iterfering with the other shots is it still 0.690 caliber size

Cheeers, thanks

 

[Little Jon]

dunno what the calibre is, my manual doesnt appear to tell me but yeah it prob is somehting like.690, i was thinking about getting a freak junior cos they have interchangeable bores n stuff, although it still has the same problem in that it has holes in the barrel

 

[Dazzer13]

About the holes

i was told that the holes were there so has a ball was shot the air would come in through hole to keep it straight and if the hole spririaled they would put a spin on it like a gun bullet making the shots more accurote and that would make a bit of sense, any way dose any one else have any other idea cause feel free, but i would still agree with Stealthknight and so they should invent something to sort out this problem off paint spliting maybe have some sort of soft pad at the point were the bolt hits the ball any way give your views.

Dazzer13

 

[Little Jon]

im not saying the holes dont work, just saying when u get a break, the paint is sucked into these holes and when u fire the next time AFTER squeegeeing it out the paint is still in the holes and it drips down slightly hitting the next balls and affecting their trajectory. and to clean this on-field is time consuming, off field just put your hand at the end of the barrel and blow throught it and it comes out. there has been an invention to stop the balls breaking, but it is for emags, called the level 10 mod, in consists of a 2 stage bolt that when fored has a high pressure bit which goes fast and at the last moment, the second part of the bolt firs on low pressure and hits the ball gently. so softly u can put your fingers or tongue in it!!! costs about £100. it was in pgi 2 months ago or summink, they froze some balls and got them out the freezer. they had dents and everything in them and the mag still fired them.

 

[Dazzer13]

Hoo

soz i didn't relize plus i am new and my friend has an auto cocker and we were playing in very bad rainy condition and he kept on miss firering balls but after he had used his squeegee he was fine so i don't know, wot would happen if they made to holes even smaller then the paint wouldn't build up so much and effect the shots and after about 5-6 the paint might of been blown out by the balls passing the holes, leaveing the holes clear making the shots more accurot how about that, of course not too small just enough for the air to difuse and for the paint not too dreep, u no like a seal, cause i don't know.


Dazzer13