ir3 settings and new egg

[Penknife]

Brought a egg for my ir3 (cops2 mem6).Can some one tell me the setting is suitable for use for the egg hopper
sens 9
bas 20
mrof20
cmrof 15
I was using these setting for an intellifeed revy
thanks

 

[TOOLE]

try taking the mrof down to about 17 and the cmrof down to about 13, means the cops will actually work

 

[John C]

Here are the settings I use for an intelifeed egg.

MROF 16
CMROF 20
BAS 14
SENS 7

They work for me but that doesnt mean they will work for you.

Basicly when moving from a revvy to a z-board egg put the sens and bas down a couple of points.

 

[Dunerat]

Originally posted by John C
intelifeed egg

You got any pics of this as I am dying to see what it looks like.
Also what is required to change the the egg11 to intellifeed and what is the feed rate like?

 

[John C]

Originally posted by Dunerat
You got any pics of this as I am dying to see what it looks like.
Also what is required to change the the egg11 to intellifeed and what is the feed rate like?

Heres a Pic

http://www.paula.clayton.btinternet.co.uk/inteli1.jpg

Feed rate beats the pants of a Z-Board egg, but you still have to use batteries we arent running completely off the gun like an intelifeed revvy!!!

All you need instead of the board is a relay and a voltage regulator(£1 from maplins). (the regulator is optional providing you have strong detents)

Oh yeah and you can't do it on an LCD cos the intelifeed is nuts (wont be with our new board), you can't do it on a 4 cos theres no intelifeed rail or something.

So you can only do the mod on an ir3 or speed.

If you want any more info just ask.

 

[jahlad]

any chance of part numbers from maplins? and a diagram? i might have a play with my spare hopper.

also with intellifeed does the hopper spin when you pull the trigger then stop when you release or does it spin for a set amount of time with each pull....does that make sence?

 

[Mark]

Take a look here, you will need to do a parts translation for Maplin but pics and how to do it are all there (you will have to sign up to view it)

Intellifeeding an Egg. A how to guide

 

[John C]

Originally posted by jahlad
any chance of part numbers from maplins? and a diagram? i might have a play with my spare hopper.

also with intellifeed does the hopper spin when you pull the trigger then stop when you release or does it spin for a set amount of time with each pull....does that make sence?

It depends on the marker...

On an IR3 or Speed it spins 0.1seconds per trigger pull(that is the smallest value). I would prefer something like 0.08 so I could ramp up the voltage a bit.


On the LCD it spins only when you go above 2bps and it continues to spin for a further 2 seconds after it is triggered, this is not practical for an egg


The thread on TAG forums in Marks link is where I got the idea from. I made a few slight alteratins to the design (at 18V unregulated it was pushing past my anti double ball, also added an LED cos little lights are cool)