IR3 prob

[enid_puceflange]

I have a MEM3 Cops 1 IR3,
now my prob is when my cops is switched on and i am dry firing its still as quick, the r.o.f is unaffected by the lack of paint, when their is no air going through the gun you can hear the solenoid being restricted, so its the vibe of the gun being fired fooling the cops into thinking there is paint ready to shhot right?
i have checked the chrystal and its ok , replaced the plastic cops rod, played with the cops sensitivity settings,and have tried the drop ball test into the breech too and it all seems ok till i live fire with no paint.
what can/should i do?????
was thinking the easiest way would be to upgrade my board to MEM6 and get Cops 2 and the opto trigger too boot.
where, who, can do this , and how much
Cheers guys

 

[Kitch]

To have your board replaced, would cost £135 for a new board from WDP and any Tech could do this for you. A lot of people seem to be switching there older angels to 'ACE' and having a buddy board and eyes installed, Stig from Team Illusion does this for about the £150 mark, and they are very, very good.

hope this helps

 

[Tom Allen]

Kitch, it's possible that the board may need resetting, i've come across a few boards playing up, on one or two features, that have been cured by being reset.

Enid, try the reset feature on the board, this will return the board to the factory default setting. You will find this on page 21 of the manual.

 

[enid_puceflange]

KItch,i would hate too loose all my whistles and bells by putting a non wdp board in it dude, bit of a tart ya see

Tom, i will give that a bash and see how it goes next week, the neighbours will be a bit peeved at me dry firing in my flat and prob call the feds!
Thanks for the help guys, apprecieted
Gary C

 

[jahlad]

Originally posted by enid_puceflange
KItch,i would hate too loose all my whistles and bells by putting a non wdp board in it dude, bit of a tart ya see

Tom, i will give that a bash and see how it goes next week, the neighbours will be a bit peeved at me dry firing in my flat and prob call the feds!
Thanks for the help guys, apprecieted
Gary C

put the barrel into a pillow and put your hand over the feed tube....makes it more of a thud than a bang

 

[enid_puceflange]

AAAAAAHHHHHH - HHHHAAAAAAA

Jahlads a midnight tinkerer too!

read my manual (page 21) no mention of hoe to re-set the board any hints guys?
Cheers
Gary

 

[Tom Allen]

Sorry mate, yours is the early manual, page 24 on yours, right at the bottom.

 

[thekid]

yep ,that re-set ****e sure works ....well did 4 me

 

[Tom Allen]

Anytime i can be of help Dale, let me know.

 

[thekid]

did u find out the price 4 the other barrel Tom??