I tired to install a clippard QEV on my sp-8 and had a miserable failure - I don't know if I cut the hose too short, if the QEV is gummed up, if its leaking from the threads but the bolt just shoots forward when I gas it up. I need to get more of the solenoid hose.
Also, what's the best way to remove the old hose and install new hose?
Anybody know the exact specs for the ion/sp-8 solenoid hose? Does it need to be polyurethane or can any hose 1/8 x 1/6 x 250 psi min work (polyethylene, etc)?
Where can you get the stuff locally? I know it only cost like 15 cents a foot I don't want to pay $5 for 6 inches worth...Is there any other industry (plumbing, aquariums, etc) that use something similar?
THANKS!!
Also, what's the best way to remove the old hose and install new hose?
Anybody know the exact specs for the ion/sp-8 solenoid hose? Does it need to be polyurethane or can any hose 1/8 x 1/6 x 250 psi min work (polyethylene, etc)?
Where can you get the stuff locally? I know it only cost like 15 cents a foot I don't want to pay $5 for 6 inches worth...Is there any other industry (plumbing, aquariums, etc) that use something similar?
THANKS!!