ion problems

[smudge1989]

My ion was leaking on the inside today after my first test, plus it was not propelling the balls correctly, could this be due to the velocity being to high?

My dwell and ROF settings are standard.

 

[baffy]

if you have taken your ion apart you could well of pinch some hosing therefore leaking

 

[baker21]

My ion was leaking on the inside today after my first test

am i right in thinkin its a new marker?if so id take it back to the shop and let them look at it.
if not baffy has a good point also if you have had it for abit the hose that goes to the solenoid tends to need replacing every now and then as it can leak from where its pushed on to the sol(thats why you have spair when brought new )

try taking the main body off the frame and leave the front banjo conected to the reg and put air through it to see if you can pinpoint the leak,if its not from round the sol or any of the banjos its most likly a bolt oring

hope this helps

 

[smudge1989]

ok cheerz baffy n baker, al giv tht a try when i get some more gas

probz see u down at the site soon baffy,

tom

 

[Skeet]

All you need to know...

http://www.zdspb.com/tech/mguide/ion/index.html

 

[smudge1989]

could it bue due to the fact that the velocity was maxed?

 

[baffy]

if your gauge read over 200psi you could of blown your slonoid

 

[smudge1989]

baffy al chat 2 ya on msn, if u sign on lol

 

[smudge1989]

It was reading around 200, av replaced all the hoses today so jus need some more gas lol

 

[WGP4Life]

through it in the bin while you can.