Ion parts

[mrb2287]

So im looking for a bolt sleeve assembley and inner body assembley .
If you have or know someone with these laying around please let me know and we'll talk.

Muchos Gracias

Mr B

 

[automag]

Are you after the outer fire can/chamber?

 

[mrb2287]

no mate the parts im after aren't on that schematic.
Its the actual back cap and internal body i need

and

the back part of this. (bottom right corner of pic)

 

[automag]

Hello

The pictures of the can are from 2 different ions',

The 1st picture is the ion xe,

The 2nd is the standard ion, if its the back can on the bottom picture, it is in the diagram posted above just broken down. Part number ION104 you have to add the swivel donut and clips

Ant

 

[mrb2287]

Thanks for pointing that out, im trying to sort it for a mate.
Its definatley the top picture and whatever that fits into that i need as the threads are absolutely destroyed!

 

[automag]

No problem, I dont have any spare parts for the XE sorry. The ion XE is the newer bolt out the back Ion it made life easier when cleaning. The older ion you need to strip the gun down.
Both guns use the same bolt its the outer body and firing cans/sleeve that are different

Disassembly instructions for the XE
http://paintballgunmanuals.com/manuals/Smart-Parts-Ion-XE-Manual.pdf

Sorry I cant help you any more

 

[mrb2287]

No roblem thanks for your help buddy

 

[LukeHart]

Smart Parts probably have them in stock still if that helps. Also before you fit it check the rear screw is not the original Ion type as these were longer and will cause the new part to cross thread again. It can be hard to sport but if you can see the head of the screw inside the rear of the breach at all it is the old type and should not be used with the Ion XE.

 

[mrb2287]

Yea I spotted that screw poking through earlier and deduced that was what had caused the problem. Like i say its a mates gun that bought of another mate etc etc so its about 95th hand lol