ION help

[Paontball Mad]

i gas my ion up and the pressures at 100psi does this mean the velocity is low bcz the paintballs arent moving that fast or does it mean that the reg needs cleaning or am i wrong all round?

please help me

cheers Tim

P.S. theres a small leak (tiny) where the macro line meets the elbow joint help me sort that out?

 

[yngndrw]

What was the pressure before ?

About the leak: Take the banjo off the host, clean the end of the hose and make sure it's cut straight, then put it back together and try again.

 

[true_death]

Could it simply mean that you have fiddled with the front reg and turned the vlicty adujster by mistake. I did this once and took me ages to figure out the problem try just turning your vlicty back up to 180PSI

 

[badd701]

is the marcro line ur using off ebay? if so its cr@ppy and doesent fit right get some of Planet Eclipse

 

[Paontball Mad]

i cant bcz i lost the spanner and when i use anything else it turns the thing underneath that how i think i created the leak the same prob as lemonadeX had!!! i want to get it all working but its not!!! the most ive ever had it was 140!!! i opened up the reg once and the grill thing fell out i put it back in thats all i did!!!

more help plz

 

[Paontball Mad]

is the marcro line ur using off ebay? if so its cr@ppy and doesent fit right get some of Planet Eclipse

i dont have a new macro line its stock

 

[badd701]

oh ok

 

[true_death]

Well the answer would be to buy a new spanner or look for someone that will sell you one in the classified

Mate it will be your veloicty ajuster that will be the problem, simply keep turning it and firing 5 shots in-between the turns. Took me ages to get it back up to 180

 

[yngndrw]

From 0psi, it takes mine about 4 turns to get to 180psi.

 

[true_death]

hmmm seemed to take me a lot longer but oh well same problem, same answer