Ion Breach Body?

[Kraazon]

Ok well basically the two things I thought would never happen to me happened. First thing was I got shot in the mouth with my Grillz and yes it cut my lip etc. To get to the point I did a superman into the snake and if you haven't already guessed I managed to rip my feedneck off, its the threads in the breach body that are gone. So my question is does anyone know anywhere where I can get a new breach body or breach body and firing chamber? Preferably in the UK or Europe but I will order from elsewhere if need be. Thanks.

I think the q-lock threads are gone slightly also so I might get a new one of those to, but I can get one of those easily.

 

[ION_CRAZY]

if you say that your breech is damaged, you wont need a new firing can. Call up smartparts, they will probably be the same price as anywhere in the UK, but Lips have them, its about £30, so check them out.

http://www.lpspaintball.biz/acatalog/Ion_Spares.html

 

[arg1271]

I could sell you a Lucky 5.1 body, it's a complete replacement for the stock upper body of the ion and give you a few benefits over the stock one:

Cocker threaded breech
true bolt out back design
wired eyes (these are brand new, and glow blue)
The replacement bolt gives a big inprovement in efficiency over stock, you need to run it at about 200psi and slightly lower than stock dwell but it still gives big gains.
I have the stock feedneck for it somewhere, similar to the std SP one that comes with the ion but reputed to hold the hopper better (i used a q-lock so can't comment on this)

These things are pretty rare now too.

 

[Kraazon]

if you say that your breech is damaged, you wont need a new firing can. Call up smartparts, they will probably be the same price as anywhere in the UK, but Lips have them, its about £30, so check them out.

http://www.lpspaintball.biz/acatalog/Ion_Spares.html

Thanks, I see they also have them on Eclipse actually, will likely get one from Lips though. Thanks.

 

[Kraazon]

I could sell you a Lucky 5.1 body, it's a complete replacement for the stock upper body of the ion and give you a few benefits over the stock one:

Cocker threaded breech
true bolt out back design
wired eyes (these are brand new, and glow blue)
The replacement bolt gives a big inprovement in efficiency over stock, you need to run it at about 200psi and slightly lower than stock dwell but it still gives big gains.
I have the stock feedneck for it somewhere, similar to the std SP one that comes with the ion but reputed to hold the hopper better (i used a q-lock so can't comment on this)

These things are pretty rare now too.

Thanks for the offer but I have a Freak kit and I have virtue eyes etc. so it wouldn't be very beneficial to me.

 

[baker21]

try here http://www.paintball-equipment-online.co.uk/

the warped ion centre.

 

[sabatman]

i know u didnt mention getting from usa but there is a shop called punisher paintball and they do loads of ion stuff cheap. The postage is around 6 quid and it only takes about 1 week to turn up and when i ordered stuff from them i didnt get charged import tax..