Ion Blackheart stuck in full auto??

[mushk1n]

Hi All,

My Ion's blackheart board seems to be stuck in full auto, but without a kick-in or sustain rate, so you pull the trigger and its off until I let go.

I have tried to change the mode to any of the other three but every time it just acts like full auto, when I listen to the beeps to say what mode it's in it is correct...

any ideas?

Also, where is a good place to find dwell settings, although I dont even know if changing that will do anything on this crazy board :S
I have tried to reset it by holding down both buttons but that only seems to reset ROF

 

[Sid Sidgwick]

Is there a chance the microswitch activation screw on the trigger is continually pressing the microswitch down or is so close that the gun firing causes it to de-press the microswitch again (mechanical bounce.)

Try adjusting your triggerout a bit and see if it still happens

check out http:www.zdspb.com for all your ion needs

 

[balf]

turn the debounce up from zero

 

[yimkin101]

wow im having the exact same probelm any ideas people??

 

[BDN]

Try a new battery

 

[MeDiC]

Mode lock setting ?

Board reset maybe... I don't know the boards, possibly gommie might be able to help with that.

 

[Teddy picker99]

Try pbnation if you havent already. X

 

[MeDiC]

Take the grip off, disconnect the battery, hold the trigger down and re-connect the battery.

Come back and tell us what colour the power LED lights up...