Invert Mini Trigger Problems

[ironfather512]

basically, the magnet broke from the top of the trigger screw in my mini, so i fixed it back on and now whether the magnet is there or not when i re-attach the body it is saying that the gun is firing.

i dont no what to do?

thanks

sam

 

[Dave284]

You broke my mini!

can have a poke at the x-mas walk on at skirmish (http://www.p8ntballer-forums.com/vb/showthread.php?t=112998 - shameless plug) if its not fixed by then, other wise im sure bolter will be able to help you.

 

[ironfather512]

ok thanks

 

[westy880]

have you got the screw undone quite abit still? when i first got my mini i undid the screw quite alot, luckily i didnt take the magnet off, but the trigger stopped working. all i had to do was screw it in a quite a bit more and it started working again. i know youv probably tired this but just trying to help.

matt

 

[ironfather512]

thanks,

i had a bit of a fiddle and still no luck,

but with out the air transfer plate when the magnet is close enough it works, but when i put the plate back on its just saying its firing
so it is one of 3 things i think

1) the magnet is in the wrong position or has become de-magnatized (somehow )

2) the air transfer plate is blocking the sensor or the magnet

3) the sensor on the board isnt working properly, like it doesnt have the range anymore to detect the magnet past the plate

any thoughts on this or what else it could be??

thanks

sam

 

[Bolter]

You mean this magnet?

 

[ironfather512]

yep that one

 

[Bolter]

I would take it all apart, and put it back together again

http://www.zdspb.com/tech/invert/disassembly1.html

just to humour me really. For example are the screws in the air transfer plate in the right positions and all present? Are the solenoid and the board correctly connected up?

Edit: dont take everything apart. Like the ASA, please don't take that apart.

 

[ironfather512]

right i had a look took it all apart and the small magnet on the under side of the body has come out, so i first need to know which way round it goes

does the side that faces down attracts the screw magnet
or
does the side faces up attracts the screw magnet

i hope that makes sense

sam

 

[ironfather512]

doesnt matter sorted it now,

thanks alot guys for your help


sam