Invert mini Problem

[M 818]

ok have a problem with my mini dont know what it is bassically when i shoot it slowley it shoot fine but when i start ramping this bolt looks as if it stops halfway to the ball and air pours out of the body any body got a clue what this problem is? Thanks

 

[lemonadeX]

Start off by checking the basics - Replace with a fresh battery and clean+lube the entire bolt assembly. It sounds dumb, but also make sure your bottle is screwed in completely.

-Will

 

[M 818]

Start off by checking the basics - Replace with a fresh battery and clean+lube the entire bolt assembly. It sounds dumb, but also make sure your bottle is screwed in completely.

-Will

i Will do all this stuff tommorow as its a bit late now but thanks for the responce mate.

 

[Will L]

Would just like to add, the clean and lube should be out of the equation. Thats been tried, and is not the problem.

 

[Jonny 03]

factory reset the board dude, I reckon that should solve your problems.

 

[trakkerboy]

mine used to do this never affected fireing though
try it with paint and see if it shoots different.