Invert Mini feed neck problem

[Embed]

Hi there,

First post! Only known about this site for a few days, but looks wicked!

Anyhow, I just got an Invert Mini, and I need to tighten the feed neck to secure my hopper as right now it sits quite loose.

But the neck has a bolt that can be used to tighten it with use of an Allen key.
However the keys that were provided with the marker don't fit!
The 2.5mm is just to big, and the 2.0mm is too small!
Iv tried my own Allen multi tool but still cant get it to fit.

Have I just got a bad bolt or?

Any suggestions to get something to fit and be able to tighten the neck?

Thanks!

Em

 

[Bambulus]

Hey mate, welcome to p8nt!


I've just checked on mine, and there is an allen key that fits the feedneck. Is yours a stock feedneck and the full allen key set originally provided with the marker? If not, you can pick up a comprehensive set of keys at most DIY stores which should have the correct size

 

[MeDiC]

Get yourself some imperial allen keys mate...

Don't crank the bolt too much, it only needs to stop the hopper from falling out, you don't want it cracking the feedneck of your hopper.

 

[BDN]

Think you need an imperial set of Allen keys

 

[Embed]

Hey mate, welcome to p8nt!


I've just checked on mine, and there is an allen key that fits the feedneck. Is yours a stock feedneck and the full allen key set originally provided with the marker? If not, you can pick up a comprehensive set of keys at most DIY stores which should have the correct size

Cheers good to be here

I have a 6 piece allen set that came with my marker.
Do you have any idea what size key you use? is it a 2.5mm or?

Get yourself some imperial allen keys mate...

Don't crank the bolt too much, it only needs to stop the hopper from falling out, you don't want it cracking the feedneck of your hopper.

All i have in metric keys, those were provided with the marker too.
I think the in-between imperial key is a 3/32"
Will try to find somewhere that stocks them!
Cheers

 

[Embed]

Think you need an imperial set of Allen keys

Aye thats what im thinking too, will hunt a set down!
Cheers

 

[WildWayz]

Just so you know, my Mini didnt come with the correct Allan key for the feedneck either.

Just ordered a dual metric set off eBay for £7 that has Imperial and Metric keys.