Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

Impulse vision problem

el_thwatez

Member of DOOM
May 9, 2005
107
0
0
near chesham, bucks
Visit site
right, i have a problem, that i cannot solve...

my impulse vision seems to not work; it never recognises a ball in the chamber and thats of any colour (dark, light, shiney, whatever); i know that because the light flashes once per second, and when i pull the trigger it makes a funny quiet little bleep... im just wondering is the eye itself broken or will it just be a connection problem.. or something else? i read somewhere about the eye not working if the dwell is too low, but i dunno if thats true

not really wanting to fork out another 35 quid to SP (since the postage is a tenner flat rate), just to get a new eye and cable, when if its a connection problem i can just fix it myself

any help would be appreciated,

cheers

dan
 

Trems

knee is broken again :[
Dec 3, 2004
296
0
0
40
West Mids
Obvious things first (although i'm sure you've checked this already)


-Good Battery
-All connections properly connected
-No paint/crap e.t.c on the eye (best to take it out and clean it with cotton buds and alcohol)
-Eye ribbon not damaged
-Dependant on what board you have you can change the eye sensitivity, this is a very probable cause.

hope that helps
 

el_thwatez

Member of DOOM
May 9, 2005
107
0
0
near chesham, bucks
Visit site
hey, cheers for that, yeah i checked the first 4, but its got a blue light cricket board so i cant adjust the eye sensitivity, cheers for the help anyway, might double check the ribbon again

anyone else got any ideas?
 

F3Z

Well-Known Member
Mar 17, 2003
800
66
63
38
Bristol, UK
or try picking up a new/second hand workingeye off the forum. Im sure someone round here must have one laying around in there tool box somwhere.

always worth a try. :p
 

dan0011

New Member
Mar 13, 2004
264
0
0
Visit site
ITS THE EYE RIBBON

trust ;)

take the right hand detent out rub the orange ribbon with a qtip place the eye back in and tighten the detent TIGHTLY

also put the imp in eye off mode and listen to see if the noid clicks if it does thats fine and the only problem you have it with a dirty eye

also clean EVERYTHING just incase