hey guys i wos wondering if any of you lot have instructions for fitting a new blade frame to my cocker and then retiming it as i can't be bothered to take it up to my local shop to get it done
cheers guys
cheers guys
how do i fit my new frame
- Thread starter benb
- Start date
messing with cockers, not worth it
absolute rubbish, thats the whole point of them.
however they dont always work if you do.
anyway, if you look on the planet site and then go to tech, it should have a manual to fit the blade frame.
and believe me, its worth having a go yourself, as learning how to time is essential for a cocker user. so make sure you have plenty of air available, and plenty of patience, but its worth every minute when you get it going, as you know you can do it if ever needed.
absolute rubbish, thats the whole point of them.
however they dont always work if you do.
anyway, if you look on the planet site and then go to tech, it should have a manual to fit the blade frame.
and believe me, its worth having a go yourself, as learning how to time is essential for a cocker user. so make sure you have plenty of air available, and plenty of patience, but its worth every minute when you get it going, as you know you can do it if ever needed.
I've never understood why people think that timing an autococker is like launching the space shuttle.. about a week after I had mine, I bought a new frame and timed it out perfectly, it's not that hard. If you have any trouble, there's about 2 million tutorials online if you look for them (There's one website in particular, don't remember the name exactly, but it was Vantrepes Autococker Page, and they have extensive tech articles on timing)
agreed,
try it yourself and if you dont get it right then it should take your local shop like 2 mins to do the timing.
there is a manual for fitting a blade on the planet website
www.planeteclipse.com
and there are timing guides for cockers alover the show
try it yourself and if you dont get it right then it should take your local shop like 2 mins to do the timing.
there is a manual for fitting a blade on the planet website
www.planeteclipse.com
and there are timing guides for cockers alover the show
exactly....the worst you can do is mess the timing up....and thats a 2 min fix for somone who knows what to do.
make sure you have enough low pressure hose tho before you start!
make sure you have enough low pressure hose tho before you start!
www.paintballravi.com/Articles/AutocockerInfosheet/ACTroub.html
Try that...Ravi Chopra's tech site.
Apart from swapping the frame over, the only major difference is that the hoses on the three way go on the other way around, as it works in reverse.
then time it...not that Ive timed a cocker, coz mines got semi-conductors to do that for me!!!
Gaz
Try that...Ravi Chopra's tech site.
Apart from swapping the frame over, the only major difference is that the hoses on the three way go on the other way around, as it works in reverse.
then time it...not that Ive timed a cocker, coz mines got semi-conductors to do that for me!!!
Gaz