hlep needed wiyh cocker

[ally]

i fitted a wgp hinge frame to my pre 2k cocker that had a slide trigger on it. Gassed it up and the back block is stuck under pressure, what do i have to do, i 've de gassed it though, how do i make it fire?

cheers


ally

 

[Y2chris99]

hit it against the wall till it gets unstuck .

 

[ally]

shut up u thread jacker

 

[Y2chris99]

u no im jkin so u playin next leg

 

[ally]

Originally posted by Y2chris99
u no im jkin so u playin next leg

i've heard that u have to reverse the tubes from the 3-way? how do i do this?

 

[Y2chris99]

wiv skill and concentraion

 

[jeevusmaximus]

The trigger works in the opposite way to a sliding one, so you have to reverse the hosing.
Have a look at this current thread, it should tell you.

http://www.p8ntballer-forums.com/vb/showthread.php?s=&threadid=18942

 

[jahlad]

you will need to reverse the outside pair of connections to the 3-way, then you will need to re-time the cocker, then you can start to fiddle with the trigger length settings

 

[dr.strangelove]

Leave the middle hose connected to the LP reg, and then reverse the ram hoses from their original setup. Then time it, then set the length, then go out to the field and rip.

 

[ally]

cheers guys for the help