Help...

[haiax0]

Hey all,

Just bought an invert mini off the sale forum here... cracked it out the box, plugged a full air cylinder in, locked on hopper, turned power on... balls fall out of the barrel once i pull the trigger.... i have allays had a manual paintball gun with no electrics... am i doing something wrong here?

Im a noob i know.... but your help is appreciated...

 

[hansolo]

do the balls fall out when pointed down to ground without pulling trigger ? - detents need replaced

do you have a chrono ? sounds like velocity is to low and is barely firing the ball - try 1/4 or 1/2 turns upwards on vel adj till it fires like normal (chrono asap)

i always video a marker working before selling and would request a dated vid before buying 2nd hand

 

[haiax0]

do the balls fall out when pointed down to ground without pulling trigger ? - detents need replaced

do you have a chrono ? sounds like velocity is to low and is barely firing the ball - try 1/4 or 1/2 turns upwards on vel adj till it fires like normal (chrono asap)

i always video a marker working before selling and would request a dated vid before buying 2nd hand

Balls on come out with little pressure once trigger is pulled i will try upping the flow rate to see if it makes a difference... battery is brand new etc..

 

[haiax0]

Ok i have turned the back end round to loosen it off and paint boomed out the barrel! I think i need to run this by some one who has one to make sure im doing this right..

basic use of a paintball marker 101 required haha!

 

[3L1TE hax]

So wait, the paint is now firing too fast? can you undo slightly what you did? it sounds like you were messing with the velocity adjuster and you nudged it a little too far...