Help with my homework time

[Chris - Nexus Eclipse]

ok, this is for my design & tech project some of you will know about. Im doing some research so any time you take to reply is greatly appreciated.

1) do you own an electronicly asister loader?
2) how long have you owned your cruuent loader?
3) which loader do you own?
4) does it feed fast enough?
5) Have you had any problems with the electronics?
6) any problems wit the shell?
7) have you upgraded your current loader with any aftermarket products?
8) you you often get hit in the loader when playing
9) what would by your ideal idea of a paintball feeding system?

than you again for your time, these are some initial questions, the answers to them will help to shape the rest of my research.

thank you

 

[Philip]

1)yes
2)1 year
3)12v Revvy and a warp
4)warp does, revvy is too slow
5)Only the revvy board getting paint on it
6)Nope
7)Nope
8)Nope
9)Revvy/Warp mixed together

 

[styles mugger]

1)yes 3.

2)2 revs both 12v,1st is 3yrs old,2nd is 3months old & warpfeed being less than 1 yr old.

3)2Revos,1 Warpfeed.

4)the 3yr old 1 no-not even for the eclipse cocker on blade at 12balls roughly,Rt u have to shoot slower than normal high rates.Warpfeed is good for both.

5)Not the Warpfeed even on vibrateing sensor.Revs can be affected by light even with the new board & light sensor.

6)The warps ok.Rev polycarbs are way to brittle & very weak at the neck/feed section.

7)both Revs with the Vortex paddles(very simliar to the evols)
The 3yr old got a mark2 xboard,new revo has the new xboard alreadyn it.
.
8)not with the warpfeed,not really no with the revo.

9)Halo/warp/Revo combination.Speed & battery friendly of the warp/halo b (not the fan of the 6 AA batterys but i like the 9 RECHARABLE AAA custom made battery pack from the warpfeed which IS SOOOO MUCH BETTER). But the small & light compact design of the Revo also the strong shell of the warp/halo b.
Not having the tight(in diameter aswell) 90degree bend which the paintball is pushed into with the halo b which can break& stick in the neck unlike the warpfeed.

Hope that helps.

 

[Darkwerks]

1) Yes
2)Two weeks
3) 12voltrevvy+ x-board
4) Yes
5) Nope
6) Nope
7) Vortex paddle
8) sadly yes
9) My ideal system would be if the Nelson girls would bring me more paint whenever I ran out.

 

[nickp]

1) do you own an electronicly asister loader?
Yes
2) how long have you owned your cruuent loader?
Revvy 1year, Halo 6 months
3) which loader do you own?
Revvy & a Halo
4) does it feed fast enough?
Revvy nope, Halo does until it pops a ball
5) Have you had any problems with the electronics?
No
6) any problems wit the shell?
Halo lid snapped
7) have you upgraded your current loader with any aftermarket products?
Yes New X board in the revvy
8) you you often get hit in the loader when playing
occassionally
9) what would by your ideal idea of a paintball feeding system?
Someting which is light, very fast, quiet, battery efficent, well ballanced.

Hope this helps

 

[Flash-Bugout]

1) Yes - two
2) 2 and a half years, and 1 year
3) Both Revvies
4) Nowhere near, although the answers to question & have helped a little
5) Yes - both boards have burned out, in the older on due to motor problems (I know cos I put an old spare board in, andwatched the magic blue smoke escape from one of the chips)
6) Not real problems, but the older one again, where the scres go through - cos they're self tapping the shell is cracking in a couple of the screw places.
7) Yes, X-Board and evil paddle, to make my two piles of spare parts into 1 working hopper and spare shell
8) In "open play" (ie not when I'm being mugged) about 50% of the time
9) pretty also the ability to feed in around 5ms, and not too heavy. Also, not 100 bleedin quid, for a hopper, that's nuts!

 

[Glorykid]

1) do you own an electronicly asister loader? YES 2
2) how long have you owned your cruuent loader?1: 3 years 2: 2 weeks
3) which loader do you own? REVVY and REVVY X board
4) does it feed fast enough? NO and YES
5) Have you had any problems with the electronics?NO
6) any problems wit the shell?NO
7) have you upgraded your current loader with any aftermarket products?NO
8) you you often get hit in the loader when playing A FEW TIMES
9) what would by your ideal idea of a paintball feeding system?Light,fast, and battery efficient quiet would be good.

 

[Collier]

1) do you own an electronicly asister loader?
yes
2) how long have you owned your cruuent loader?
Halo B - 3 months. Warp - 1 day
3) which loader do you own?
Halo B and a warp
4) does it feed fast enough?
Yes
5) Have you had any problems with the electronics?
No
6) any problems wit the shell?
No
7) have you upgraded your current loader with any aftermarket products?
No
8) you you often get hit in the loader when playing
With the Halo alone occasionaly, not played with the warp yet.
9) what would by your ideal idea of a paintball feeding system?
Got it, Halo B is perfect. Warp can only enhance that if it doesn't un-balance the whole thing

Paul.

 

[MrPink]

1) Yes
2) 3 months
3) 2, Ricochet and Warp Feed
4) oh Yeah
5) Nope
6) No
7) No
8) No
9) Warp Feed w/ Halo all as one balanced unit with one power source!

 

[weedave]

1) do you own an electronicly asister loader? No
2) how long have you owned your cruuent loader? 1 Year
3) which loader do you own? Revvy 12 Volt
4) does it feed fast enough? No, I am upgrading soon
5) Have you had any problems with the electronics? No
6) any problems wit the shell? No
7) have you upgraded your current loader with any aftermarket products? No
8) you you often get hit in the loader when playing? Yes
9) what would by your ideal idea of a paintball feeding system?
Fast Feeder, Small, a Shape which will help balls bounce, Battery Effecient, Light and Quiet!

-Dave