Help with my air tank

[Dean B]

I have this air tank with the standard reg -



The fill nipple is at the 3 o'clock position and diggs in my wrist when holding the marker, is there any way to move it?
if so how would I do it?

below it a picture -

 

[alexd]

Yes... you can use the Ninja reg clips, if you can find them in the UK
http://www.discountpaintball.com/Ninja-Paintball-Regulator-Position-Adjustment-Clip-Kit_p_5006.html

Or buy a new reg, like a Ninja that allows you to move the fill nipple position

 

[tooniek]

Easiest way - put bottle oring into ASA before screwing in the bottle. It should help

 

[Dean B]

There are a couple of grub screws near to where the reg screws into the asa would loosening these offer any adjustment, one of these screws can be seen in the picture.

 

[tooniek]

There are a couple of grub screws near to where the reg screws into the asa would loosening these offer any adjustment, one of these screws can be seen in the picture.

I'm advising to leave those screws in peace. Threads are gentle and it's easy to destroy them

 

[Evil Rich]

Those grub screws are to lock the bonnet into place, only remove if you need to take the bonnet off to service the internals otherwise don't touch!

As mentioned a set of ninja shims or placing an oring inside the ASA will help space/reposition the angle of how the bottle screws in

 

[Dean B]

Ok thanks for that, I'll leave it alone and save up to get a ninja reg.

 

[albertgdg]

Check the o-ring on the bottle beside the threads

 

[Jon S]

Anyone know of UK suppliers for the Ninja clips, look to be a good solution.

Otherwise, what difference is there between them and an o-ring in the ASA?

 

[alexd]

Anyone know of UK suppliers for the Ninja clips, look to be a good solution.

Otherwise, what difference is there between them and an o-ring in the ASA?

@L.i.P.S stock Ninja regs and I think bought some from them in the past. Not sure if they have stock now or could get you some. They could also offer guidance for the oring etc. Just give Jon / Chris a call!