help with impy set up

[Superflyuk]

currently using quite a bit of air on each shot thus using up alll my air in one game (only a 0.8 tank) and i set the marker to sue less air each shot and wanna keep the accuracy, what should i do? using a an AA progressive barrel, might be idea to get an 18" freak maybe? or change the pressure on the max flo?

any ideas!

cheers fly

 

[chunk.Clan]

Your impy should be runnin at a pressure of 150-180psi, Once this is set, use the dwell adjustmanet to increase and decrease the fps. As for the change in barrel, this does not increase your accuracy, all it does is make it more difficult to change hands when tight behinmd a barricade.
Hope this helps.
C.

 

[Superflyuk]

me thinks i should get some voodoo inserts mainly new bolt and tape worm and get myself an LPR

 

[Graham-DV8]

As said above,

With my old Impy (just sold) I had it running at 175 (ajusted the input pressure from maxflow/did not change dwell at all) with dwell at its sortest

Out of a o.8 4.5k bottle I was able to almost empty a 3+2 pack, but that was with eclipse/voodoo internals.

 

[pgaglio]

If you want some good info on Imp upgrades, go here:

http://www.kamworld.net/paintball/ImpulseFAQ.html


All other things being equal, higher input pressure (from your MaxFlo) and lower dwell will increase efficiency. A better paint to barrel match can help efficiency and accuracy as well. Finally, adding an LPR and an aftermarket valve (ND, Evil, Eclipse, etc.) should also boost your shots per tank.

 

[L J]

what are your internals, and what are the specs ie what pressure is going in etc is the air system 3k or 4.5k?