HELP!! Spyder Xtra

[Pump'n'Splat]

I've lost the small plastic disc that slides into the chamber underneath the bolt chamber, and seperates the Field Velocity adjuster mechanism from the piece that attaches to the bolt and slides up and down inside the lower chamber (Sorry, i'm not the most technical of players

{=======} (Bolt)
|
|| <==== (Sliding piece in lower chamber)

^
This is what's missing, the little plastic spacer/washer

A) Is this going to affect the marker a lot?
B) Can anyone suggest where I can get a replacement?

Cheers

 

[pballplayer35]

Ask Joe Bob, he'll know.

 

[ChiZZerS]

is it like a rubber circle with a hole in the middle...

cuz if it is...it doesnt make much if any differance

 

[ChiZZerS]

ill try and draw it
as it comes out in order....

[] |/|/|/|/|/|/|/| -------|| | [|||||}||
^ ^ ^ ^ ^
(rubber ring) (spring) (plastic thing)(metal plate) (v adjuster)
is it the rubber thing that has gone?

 

[QuackingPlums]

Here's a diagram of the Spyder Xtra in .pdf format - is it part 26A that has gone missing, or 27A?

http://www.kingman.com/section/support/diagrams/spyder_xtra.pdf

26A is the black rubber grommet thing that helps cushion the striker/hammer as moves backwards when the marker fires.

27A is a little metal disc that stops the velocity adjuster from digging into the black plastic spring guide (part 27)

Neither part is ESSENTIAL, but you'll be putting extra wear and tear on the internals unless you replace them.

 

[Shep]

had a m8 loose his rubber buffer & the without it caused damage due to no buffer when it was recocking,I would try to get 1 if i where you or make something to do the job othewise contact Chris at Havoc paintball he has alot of spyder/spyder clone bits & bobs kicking about m8

 

[QuackingPlums]

Also, I'm guessing that none of the spares in the spares kit I sent you fit the description?

 

[ChiZZerS]

i spent a fair bit of time drawing this so i better be right...

is this what you have lost?

 

[le-pig]

was it the same disk that fell out when we changed the spring

 

[Pump'n'Splat]

Whoa, quick response everyone, and thanks for all the comments.....QP, yes it's part 26A. Sephiroph, not a bad pic! And yes it's the little rubber donut...

QP nope, Regrettably no spares in the little pack

And Le-pig, that was part 27a that fell out!!! Still got that though.....(this is starting to become "Losing by numbers" )...but Rit has offered me his Spyder carcass to pull apart, so I think it's sorted...

Cheers for the help and advice all.