Help changing ROF on etek 5!!!!

[kway44]

As the title states I'm finding it hard setting my etek 5 to Mill 10.5

Any help would be great.

 

[StewartW]

Enter programming mode (Hold in the trigger whilst turning the marker on) The LED should blink white.

pull the trigger twice to get the Eyes ON ROF Cap.
press the button for a approx a second
Pull the trigger 10 times.
press the button again
pull the trigger 5 times
press the button again. If it flashes green it worked

Pull the trigger again, the led should flash blue.
press the button for a approx a second
Pull the trigger 10 times.
press the button again
pull the trigger 5 times
press the button again

That's your ROF Cap set.

pull the trigger until the led flashes red.

then press the power button .
pull the trigger 4 times.
press power button again. Should flash green.

That's the firing mode set.

Sorry, I'm assuming that you don't have the OLED Screen upgrade?

 

[kway44]

OLED Screen upgrade?

You are right mate no OLED board thanks for the detailed walk through I'll give it a go Cheers

 

[StewartW]

You are right mate no OLED board thanks for the detailed walk through I'll give it a go Cheers

Sorry, I've been a dafty. Do the firing mode step first.