Headhunter Mag Help
- Thread starter LLOYDE
- Start date
Unless you want the valve replaced all the normal mag parts fit, the adjuster nut at the back may have already been replaced as the original was a different allen key size to a mag, all the O rings etc are the same, the rail didn't have the safety slot milled in it but then the valve didn't have the pin in the side either so no problem there.
mark do you have a headhunter? the main problem is the
expansion chamber (air america) what dose it do ? it keeps breaking O rings .will try to provide photo's to make clearer
expansion chamber (air america) what dose it do ? it keeps breaking O rings .will try to provide photo's to make clearer
Well lets see what the pics show first and yes I do have a Headhunter....well Colonial...same thing they re-did the paintball range to include an airsytem as well all under the Headhunter banner, unless I am thinking of a totally different marker all together, it was sometime ago 
Ok the body is well different to what I was expecting, but all the normal mag bits will fit. 1st time I have seen that expansion chamber but unless you are running Co2 don't use it...AFAIK John Sosta is still the Air America importer so get in touch with him for O ring spares...very unlikely that they will have any wierd sized ones in it...what you can't do it swap the Mag looking parts with actual Mag parts...very slight differences in sizing.