HE Shocker bolt Orings

[J@mes]

well...

i wanted to find out which bolt was in my shocker, found out that is was the HE bolt, but the front cap on the firing can wont go back on, the Clear/white oring that sits on the front inside of the firing can seems to be too loose.

which oring is this, and a) does anyone know where to get a shocker oring kit or b) can anything send me one

-james

 

[no-infernomark]

to start your meant to take the o-ring off before you put it back on, i.e o-ring off, take cap off to clean then put back on the o-ring on, its a 15/90 o-ring and i believe if you speak really nicely to tom allen he will sell/give ya some. if not the smart parts website do spares kits, or if not im in elsham tomorro and i think you train/play up that wa so il give ya one.

 

[J@mes]

not sure what you mean buddy, i took the whole bolt assembly out, but the end of the firing can stayed at the end of the chamber, when i finally got it out, the end of the firing can would go back on, the oring seems to have stretched a bit, so has too much slack in the oring to sit inside the can.

where not at elsham this weekend mate, its the masters, so no training
will drop tom allen a PM.

thanks for the help

-james

 

[J@mes]

One more thing:

how do you find out what the Max ROF is set to on a Blackheart shocker board, i've had a look on ZDSPD, but cant really make heads or tails of what he's saying.

has it got something to do with the Dwell?

(man Dye/protos are so so much simpler )

-james