Gun Shooting 210fps Tops

[BSwitzer]

Alright, here is the problem.

When I first took my TL+ out to the feild I went down and got chronoed. I couldnt get it below 310. So they told me to get my spring cut. They cut it too small and i was stuck around 220 for the rest of the day. So I got a new spring and it still wont shoot any higher than 240, but it normally is in the 210's. I'm thinking that I might have screwed something up when I took my gun apart to clean it. Is there any other reason for it shooting so slow? If there is please tell me.

Thanks
-Brett-

 

[vantrepes]

Make sure the valve is in correctly, the big hole in the valve should face the front of the gun. Other then that, oil the hell out of it, and you can also try another spring.

 

[Skurge420]

make sure your spring is stiff enough...and check your valve, when you look in the bottom of the gun while the grip frame is off and the set screw is out you should see right into the hole in the valve

 

[Mittenz The Kittenz]

don't know if you have fixed your prob yet, but I would try getting a maddmann spring kit. I have one for my m98 and it gives me quite a range in velocity.

 

[PUITF]

Get yourself a sypder springkit and check to make sure that nothing isdragging in the bolt or hammer area