gun id

[monkeyman]

I have just bought 2 cockers off of ebay with 2 automags, i am after some knowledge about the cockers and one of the mags. right onto some details:

the first cocker is a black, right feed, slide framed with brass pneus the serial number is 8990, its has "swift line" with an arrow engraved on the side (looks factory) it has a venturi bolt that has marker high performancelasred onto it.

the second cocker is a silver, right feed, slide frame with "evolution" on the side it has no serial number from what i can see

i know this is a mag but it has me stumped as to where/who it came from it is a classic mag with "Capt. Bo-Peep" lasered onto the body it has a "whispering death" air america gas through front grip the serial numbers on the valve are matching the number is cf08820

i can post pics later on if needed

 

[cowface]

dude !!! pictures all the way !!!

 

[SabreWolf]

i know these guns. the evo cocker just needs a good clean but works nice and is the best gun you have got out of the 3.

the black cocker is standard, nothing special.

the mag is an old team gun from the states and is perhaps alittle bit of history, bo peep were made up of players from aftershock that came over here to play a few times, might be wrong tho.
The mag works however but needs new o rings through out and the valve if i can remember is from an xmag or an rt.

 

[monkeyman]

the black one is a 1992 cocker that has been modified by swift-line the mods are "Drilling a special hole through the top of the receiver and hammer so that the sear adjustment can be fine tuned without taking the trigger assembly off. He grinds the main spring so it doesn't rub the firing pin. He also puts an allen screw through the back of the trigger assembly that can be adjusted to fine tune the trigger pull. He lightens the bolt and generally streamlines all the internals so that they mate perfectly, thus negating any manufacturing sloppiness."(copied from a site i found on google)

i have replaced the o-ings in both mags and they both now work and i got a bit of a suprise as the "team" one had the rt valve and a level 10 bolt great news for me as i got the lot for a really great price

 

[monkeyman]

oh and cowface just pop round later and you can see them in the flesh

 

[SabreWolf]

p8ntballer-forums.com/vb/showthread.php?138965-MArker-stungy&highlight=

heres the original thread posted by the guy you got them from when he first bought them.

 

[monkeyman]

well i have run out of air so cant test the cockers may need some help with timing if they need it

 

[SabreWolf]

the evo will need timing if you strip it right down.

i think we had them running on co2 i dont think the evo was set reg wise for air, cant remember for sure.

 

[Mclovin101]

U picked them up in the end. Must pop around and see these in the flesh. Being reading about that alot lately

 

[monkeyman]

yeah i went up on thursday morning

the capt. bo-peep mag has alot of history as i have found out from the automags forum here is the link that was posted there regarding the original owner of this mag
http://www.mcarterbrown.com/forums/paintball-news/64053-old-school-paintballer-jim-andersons-obituary.html

if anyone has any more info/pics/articles on the "Bo Peep and His Sheep" team i would love to have a read as this automag is getting more and more interesting the more i dig about?