got bored, started fiddling

[robof9]

so i have a bushy which had a dm4 board mod done, thing was the frame was red and the bushy black.

then i upgraded to a star frame on my ego.....guess whats coming

it took a while and is no means finished but heres the spec

locking feedneck
j+j ceramic
shortened stock bolt
helbore detents
dyin2liv pin
sonic lpr
ported and polished ram
vapor valve/spring mod
ego reg
ego stock frame
black star trigger
stock ego board 1.06
dm4 solenoid harness to stock noid
dm4 switch/batt harness to halo eyes(3mm)
flipped and drilled eye holders

think thats everything

was originally gonna do the 90 mod, but i had all these bits here so why not, and btw it works but a bit bouncy atm

so meet "BUGO"

 

[John C]

Nice work.

I think if you had gone for the 90 frame in the end it would have been really tall.

 

[chrismrgn]

Wow, lol just "fiddling," thats quality work!!

 

[robof9]

will need a reanno, + need a bit of delrin to fill the void where the qevs were.

now all i need is a good old test fire to set it up

 

[jahlad]

good one!

now ive not looked at the internals of the bushy before but i bet you could mount the noid in the top of the ego frame as it does on an ego and remove that big horrible tray and make the whole marker a lot smaller!

 

[robof9]

funny you should say that, i have another bushy with trayless mod done, trouble is the timmy noid just wont fit in the gap, and i havent come across a noid(other than ego noid) that will fit whilst having barbs to connect to the trayless.

also if i use the frame and no board, use choas in stead, i will be able to use timmy noid, but not enuff room for the battery, and no way of fitting the switch(john c help please switch mod)

i am gonna talk to the guys at air solder in the us, to see if there is a noid that fits the bill which doesnt cost a fortune.

 

[jahlad]

im fairly sure most noids are gonna cost around the same im afraid.
an ego noid is the obvious choice, and you could even use an ego manifold and just run the hoses to where you want them. you might need to come up with some sort of small spacer instead of the tray but you could shrink the marker loads!

 

[Muffin Man]

Good work!

You should post that on the nation, the American's would go mad for that!

 

[robof9]

have done, in bushmaster section

jahlad, have a 7 mm tray mod called trayless mod from blue fork designs, once this one is finished i will start on the next. i could reduce tray height by about half if i get bored, and id need to thin the manifold which is well big at the minute. i think its called work in progress, but not bad for a saturdays tinkering i think.

 

[jahlad]

Originally posted by robof9
have done, in bushmaster section

jahlad, have a 7 mm tray mod called trayless mod from blue fork designs, once this one is finished i will start on the next. i could reduce tray height by about half if i get bored, and id need to thin the manifold which is well big at the minute. i think its called work in progress, but not bad for a saturdays tinkering i think.

definatly! looks like fun....keep posting pics.....i love to see other peoples tinkerings!