goggles

[stevenrules]

i have not had the best experiences with goggles the first pair i had were jt protecus they were great until i got moisture between the lenses and now i have proflex 8 and they have been crap from the word go they steam up after 10 minutes could you please point me in the direction of a decent pair of goggles

thanks steven

 

[Dskize]

c.mon you've been around long enough .

from my personal top 4

proflex (not flex 8s) probably your cheapest bet get a thermal lense )no steam

profilers (no steam)

I3's thermal lense (no steam ) most expensive

there are vents now but they are difficult to get and way expensive

or you could just buy a new thermal lense for your flex 8's

goggles only steam up due to crap (scratched) lenses

 

[no-infernomark]

profilers all the way,

iv had loads masks and profilers are the ones i ame back to

 

[J@mes]

use a headband or sandana, it stops the sweat from gathering in the foam and steaming up, beleive me, it helps alot.

 

[Fish]

profilers never ever fog up... i3's can do since they have a tighter profile on the face, or so i've found.

but either will serve you very well

 

[stevenrules]

proflex 8 are ment to have thermal

 

[Robbo22]

firstly, do as J@MES said and wear a headband, doo rag whatever, stops teh sweat, manya people at my site have had profilers, dyes fogg up on them, i had a JT spectra, can't fogg it up, now have a proteus i bought for a tenner, cleaned it, replaced lense and took peak off my spectra adn its bloody brilliant cant steam that, if you have a problem with a lense, moisture between, scratches, jsut replace them doesn't cost much

 

[SteRoberts]

as far as i am aware, the proflex, flex 8's and proteus all use the same lens.

 

[Dskize]

they do.. so the lense you have needs replaced i have proflex and they never steam up

 

[stevenrules]

i have replaced the lense i think it might be the mask itself not the lense