geo

[cheyenne]

hi all got a m8s geo 2 he as had it to you and still doing the same thing first ball drop of when you dry fire it is ok put the eyes on and it does it only with a ball in it we have done every thing you can think off 2 thing we have not done is change the eyes and the board can you help

 

[StewartW]

What have you actually done so far, talk me through it.

I know you've probably done this already.

For FSDO :
I'd Make sure you have cleaned the entire bolt assembly,propshaft and can.

Replace every o-ring on the bolt and can, don't forget the #17 on the inside of the can. (Residue from paintballs can accumulate here)

Then regrease, making sure, you have the correct amount of grease.

Is your dwell,FSD Delay and FSD Compensation at the correct level? (Do a factory reset to the board)

 

[cheyenne]

done it all m8 2 thing i have is the eyes and board all orings done at eclipse

 

[lettucecheesecake]

Cleaned the hpr?

 

[cheyenne]

donit

 

[lettucecheesecake]

Strange one.

 

[StewartW]

shouldn't be the eyes. Have you tried a replacement pilot valve?

 

[cheyenne]

shouldn't be the eyes. Have you tried a replacement pilot valve?

yes that as well

 

[StewartW]

Hmmm, then @STONESOLDIER is your man for a new circuit board.

Post up your current Dwell and other timing values though please?

 

[NitroBall]

Had exactly the same problem on a team mates Geo 2.1
FSDO, did my head in, tried everything including changing parts over from my geo.
Last and final thing i did before i gave up was tweak the dwell up 0.5ms from stock to 13ms, been fine ever since.

I'm not 100% convinced that 0.5ms on the dwell made such a difference, especially above stock, but seem to have done the job.