Fill rig question

[tim_c]

I have ordered a 12l 300Bar dive tank with a non-diving valve for filling paintball tanks, airguns etc. It's not bad, as I get 80 free fills too!

The kit comes with a microbore hose, terminating in a female connection of some kind:
http://www.divecentral.co.uk/h021381_001.jpeg

Or, I can take the hose off, and it would look like this:
http://www.divecentral.co.uk/h021380_000.jpeg

What I want to know is: If I get a female quick-release coupler, what will I need to attch it to the female threads on the valve/hose, and (most importantly), where can I get such an adapter?

Thanks

 

[Adamantium]

you could try h-pac...?

 

[KOHI]

Or Powerball they kit like that

 

[spreadz07]

Think you will find you need a DIN fitting fill station. (sure A clamp is the other fitting used for fill stations) used to see them on ebay or go online and ask shops if they do a DIN fitting fill station
edit
here you go mate. click the link
http://www.planeteclipse.com/site/eStore.asp?show=catSub&sC2=69
Just noticed out of stock, but you get the idea
Nige
PLANET ROCK!!!!!!

 

[Shadlad]

Andy at fat bobs will help as well or get him at YPC

 

[A1-BOY]

not a question you here everyday i know. but tim_c are you my brother? its mike.

 

[mikey601]

Go pm Tom allen, he'll sort you out

 

[tim_c]

A1-Boy, sorry,I'm not your brother!

Thanks for the links guys. I don't need a ful DIN fill station, as that's what I've pretty much got! All I need is the quick-coupler off the end (to connect to the fill nipple on the tank)

And...

Maybe this???:
http://www.planeteclipse.com/folders/dataproduct/large/male2male.jpg

To jointhe coupler to my valve/rig

Basically it's a rig for filling Rapid7 air rifle cylinders

 

[spreadz07]

No idea about air rifles mate but i would imagine you need the snap connector like I have ringed in the pic.
Planet should have them. give them a call or email them
Nige

 

[tim_c]

Yeah, that's what I need... LiPS sell them, as do dozens of other places.

But I will also need some method of attaching it to a Female threaded hose... Like the male/male adapter above.

I was hoping to ascertain exactly what might work to join that circled piece to the female end of the hose, or straight into the valve itself?