Fighting robots: Paintball Co2 Tanks

[Danjr1]

Hi,

Im building a 13.6kg Co2-powered fighting robot and need a little help on making sure the threads are compatible throughout the pneumatic system.

Here are the parts i would like to use:

** 9oz or 12oz Co2 aluminium tank (9oz http://www.ebay.co.uk/itm/221062358095?ru=http://www.ebay.co.uk/sch/i.html?_from=R40&_sacat=0&_nkw=221062358095&_rdc=1 or 12oz http://www.ebay.co.uk/itm/271187681365?ru=http://www.ebay.co.uk/sch/i.html?_from=R40&_sacat=0&_nkw=271187681365&_rdc=1 )

** a replacement on/off valve http://www.ebay.co.uk/itm/280559648219?ru=http://www.ebay.co.uk/sch/i.html?_from=R40&_sacat=0&_nkw=280559648219&_rdc=1

** 150psi Regulator http://www.ebay.co.uk/itm/180891890257?ru=http://www.ebay.co.uk/sch/i.html?_from=R40&_sacat=0&_nkw=180891890257&_rdc=1

Now, im assuming that all these parts will fit together very easily as they are standard paintball parts but the question I have is what BSP fitting would fit on the output of the reg? I've heard that either a 1/2 or 3/8 BSP thread is close enough to fit but was hoping people on here would be able to help!

Cheers

Dan

 

[bojjob]

I'm pretty sure all Paintball tank regs like that are 1/2" x 14 BSP

Hope that helps
Danjr1

 

[Danjr1]

cheers dude!